Common Problems
A standard failure is for the monitor to "pop," then go dark. Hitting it may bring back the picture. This is often caused by cold or cracked solder joints on the flyback transformer, which resoldering should cure.
Specifications
� Sync Frequency: 15.6 kHz Horizontal
� Dot Pitch: 0.39mm or 0.42 mm
� Sound Output: 1.0 W RMS/Channel at 5% maximum THD
� Input Connectors: One permanently attached HDD15 and Audio R/L
Pin-Outs (SCART Euroconnector)
�� Pin 1: Unused
�� Pin 2: Audio Input (0.5 Vrms/ > 10Kohms)
�� Pin 3: Unused
�� Pin 4: Audio Ground
�� Pin 5: Blue Ground
�� Pin 6: Audio Input (0.5 Vrms/ > 10Kohms)
�� Pin 7: Blue Video (0.7 Vpp/ 75 ohms)
�� Pin 8: Unused
�� Pin 9: Green Ground
� Pin 10: Unused
� Pin 11: Green Video (0.7 Vpp/ 75 ohms)
� Pin 12: Unused
� Pin 13: Red Ground
� Pin 14: Unused
� Pin 15: Red Video (0.7 Vpp/ 75 ohms)
� Pin 16: Fast Blanking
� Pin 17: CVBS Ground
� Pin 18: Fast Blanking Ground
� Pin 19: Unused
� Pin 20: CVBS Input (1 Vpp/ 75 ohms, sync for linear RGB input)
� Pin 21: Screening Plug
Pin-Outs (Digital RGB 8-Pin DIN)
� Pin 1: Status Computer (?)
� Pin 2: Red
� Pin 3: Green
� Pin 4: Blue
� Pin 5: Intensity
� Pin 6: Ground
� Pin 7: Horizontal Sync or Composite Sync
� Pin 8: Vertical Sync